Suncourt DRY04 Centrax Dryer Booster Kit
Solve residential electric dryer vent problems by supplementing the fan in your dryer to enhance it’s efficiency. The Suncourt DRY04 Dryer Boosting Kit comes with an accurate, reliable current sensing switch that turns the fan on and off when it senses current from the dryer. Current sensing is more reliable than pressure switches used in other dryer boosting applications. Stack effect, wind and installation can interfere with the operation of pressure switches by starting the fan unnecessarily or simply not turning the fan on when required.
- Shorter drying time with less wear and tear on the dryer
- Reduced lint buildup inside dryer and duct
- Thermal overload protection and features an automatic reset
- Current sensing switch
- For use in a duct with a total equivalent length of 25 feet to 140 feet.
- 5 Year Limited warranty
- Safety Rating: MET® Listed to UL & CSA Standards for USA & Canada
WARNING: The Suncourt Dryer Vent Kit is only approved for installation for electric clothes dryers.
 |
Do you have questions about the products on this page? Click on the ? image on the left or this link to ask us your questions! |
| #1 | Q: How is the current sensor wired to the fan? A: See page 4 of the installation manual for the wiring diagram: https://www.hvacquick.com/catalog_files/Suncourt_Dryer_Boosting_IOM.pdf Asked on 2019-07-09 by Mike |
|---|---|
| #2 | Q: Can the unit be installed in an attic? I have a Second floor laundry that vents through attic and through the roof. Thanks A: Sure. Attic installation is quite common. Asked on 2017-11-23 by Matt |
| #3 | Q: What is the voltage 120 or 240? Thanks A: The fan is 120 VAC. Asked on 2015-02-04 by Tom |
| #4 | Q: What activates the fan? Is it temperature? Is it moisture? Is it pressure in the duct? A: The fan has a current switch. When the current switch senses current flowing in the dryers power supply it activates the fan. Asked on 2014-09-05 by Jim Kelly |
| #5 | Q: What are the dimensions of the current switch? A: The current switch is 1-1/8 inch thick, 1-3/4 inch tall and 3-7/8 wide including the mounting base tabs. This is as of Sept 2014. Asked on 2014-08-28 by Kim |
| #6 | Q: Does this fan have to switched on and off manually? A: It has a current switch included to operate the unit. Asked on 2014-07-02 by JC |
| #7 | Q: Where should the clothes dryer booster fan be located? Closer to the dryer or in the middle of the exhaust line or closer to the outside vent? This line is about 20 - 25 feet long. Thank you. A: Farther is better...most manufacturers want at least 12-15 feet from dryer to fan. Asked on 2014-06-16 by Jon B |
Related Products
Suncourt Centrasense DRM04 Dryer Booster Kit
DRM04 DEDPV dryer booster kit for dryers that have a long duct runs to the outside. Includes remote mounted indicator panel.
InOvate Dryerbox Metal Dryer Vent Boxes
Metal Dryerbox allowing the dryer to sit flush to the wall without crushing the exhaust hose. 5 models for up/down venting as well as 2x4 and 2x6 walls.
InOvate LT45 and LT90 Dryer Duct Elbows
Dryer duct elbows. Smooth 45 and 90 degree bends. Eliminate the duct run penalty required for other elbows.
Construction Solutions Plastic and Metal Dryer Vent DBX1000 Boxes
Plastic and metal Dryer Vent Boxes with snap on trim ring. Available in two sizes: 4" (for a 2x4 wall) or 6" (for a 2x6 wall) .
Seiho RCA and RCC Series Stainless Steel Dryer Vent Caps
Made from polished stainless steel for durability. Designed for exterior applications in dryer, bathroom, or kitchen exhaust venting.
Seiho SB and SFB Series Aluminum Dryer Vents with Backdraft Flapper
Vent caps suited to exhaust fan applications such as dryer, bathroom, or kitchen exhaust venting. Standard with flapper damper.
why buy from us?
We're engineers passionate about home ventilation and serious about customer service – so you can count on us for carefully-selected equipment and expert advice to ensure your project is a success from specification to installation.
Your call is answered by qualified people who will gladly discuss your project in detail, advise you professionally and never sell you inappropriate products.
