- residential
- Ventilation Accessories
- Grilles - Rectangular
- TRUaire 103M Series Stamped 3 Way Sidewall and Ceiling Registers
TRUaire 103M Series Stamped 3 Way Sidewall and Ceiling Registers
103M Features :
- Stamped louver in 3-way airflow pattern
- 1/2" spaced with 45 deg blade angle
- Single lever operated multi-louver shutter
- Counter-sunk screw holes with 2" screws provided
- Finished with white powder coating
Sizes listed below are LIST SIZES -- opening size. A 12x12" LIST SIZE grille frame will slide into a 12x12" drywall opening. The actual outer size of the grille frame is larger.
 |
Do you have questions about the products on this page? Click on the ? image on the left or this link to ask us your questions! |
| #1 | Q: Duct opening is 10.5x6.5 - what size should I order? A: Without going custom, you would get 10x6 as overall size will be 11.75x7.75 which will cover the hole. May have to get creative on the sides where the screws are to make sure they hit something but should work. Asked on 2020-01-16 by Kristen |
|---|---|
| #2 | Q: Do these shut completely to block airflow in to the room? A: These do close off completely but there are no edge seals on the blades so some air can leak through. Asked on 2018-11-25 by Dixie |
| #3 | Q: I am looking for an 8 X 4 register that has screws that are 8.5 apart (to fit the existing duct). Can you tell me how far apart the screws are on your 8x4 register? A: The 8x4 register has a hole spacing of 8.875 inches. Asked on 2018-10-20 by JH |
| #4 | Q: How do I measure to get the right fit A: Measure the size of the hole/opening. If you measure 12x12 then get a 12x12 list size grille. A 12x12 LIST SIZE grille frame will slide into a 12x12 drywall opening. The actual outer size of the grille frame is larger. CALL US IF YOU ARE NOT SURE. 877-711-4822 Asked on 2016-12-11 by Luis |
| #5 | Q: I have a 3 way vent grill which fits into a ceiling hole that is exactly 9 1/2 and 7 1/2. The exterior measurements are actually a little more than 9 1/2 and a little more than 11 1/2. Which model of vent would I need? A: These Truaire units are actually 1/2 smaller than the listed size where it goes into the wall, so the 103M would be a fine choice. Asked on 2013-11-24 by Villegas |
| #6 | Q: I have a vent with inside measurement of 5½ and 13½. That is the ceiling hole would have to be that size. The louver handle is broken off. What size vent would I need and would it screw into the frame already installed? A: In this series a 14x6 would fit. Asked on 2013-11-10 by Jerry M |
-
residential
- AirFlow Boosting
-
Grilles, Registers & Louvers
- Learn about solutions
- Bar Linear Metal Grilles
- Grilles - Rectangular
- Grilles - Round
- Baseboard Registers
- Curved Blade Grilles
- Decorative Grilles
- Filter Grilles
- Perforated Flat Custom Grilles
- Perforated Flanged Custom Grilles
- Plastic Grilles & Registers
- Round Perforated Flat Grilles
- Slot Diffusers & Returns
- Spiral Duct Diffusers
- Spot Diffuser Nozzles
- T-Bar Plastic Supply Diffusers
- T-Bar Metal Supply Diffusers
- T-Bar Return Grilles
- Wood Grilles
- Louvers
- Dampers
- Access Doors
- Air Handlers
- Attic Fans & Vents
- Bathroom Ventilation
- Booster Pumps
- Crawlspace-Radon Ventilation
- COVID-19 Mitigation
- Condensate Pumps
- Dryer Boosting
- Evaporative Cooling
-
Fans
- Learn about solutions
- Inline Fans
- Inline EC Fans
- AV Closet Cooling
- Basement Ventilation
- Ceiling Mounted Bath Fans
- Crawlspace Ventilation
- Destratification Fans
- Draft Inducers and Chimney Fans
- Dryer Booster Fans
- Explosion Proof Fans
- Exterior Exhaust Fans
- Garage Ventilation
- Hydroponics Fans
- Propeller Fans Direct Drive
- Radon Fans
- Room-to-Room and Register Boosters
- Rotary General Purpose Fans
- Timers
- Exhaust Fan Controls
- Filter Boxes
- Filters & HEPA
- HRVs and ERVs
- Floor Heating
-
Indoor Air Quality - IAQ
- Learn about solutions
- HEPA Filtration
- Inline Filter Boxes
- Air Exchange Ventilators
- Air Inlets & Fresh Air Kits
- Air Purifiers
- Airflow Regulators
- Active Dampness Control
- Dehumidifiers
- Duct Heaters - Electric
- Energy Recovery ERVs
- Filter Change Alert
- Garage Ventilation
- Humidifiers
- Heat Recovery HRVs
- Pressure (Air) Balancing
- Radon Fans
- Radon Sensors
- Supply Air Ventilators
- Thermostats
- UVC Lights and Systems
- Zoned Exhaust Systems
- Kitchen Exhaust
- Makeup Air
- Mini-Splits & Heat Pumps
- Pumps & Instant Hot Water
- Solar Air Heating
- Tankless & Flue Venting
- Thermostats and Fan Controls
- Title 24 Products
- Whole House Fans
- Wildfire Smoke Control
- Wine Cellar Coolers
-
Ventilation Accessories
- Learn about solutions
- Access Doors
- Air Dampers
- Air Inlets & Fresh Air Kits
- ASHRAE 62.2 Controls
- Attic Vents
- Current Switches
- Discharge Caps - Wall
- Discharge Caps - Roof
- Dryer Exhaust Caps
- Dryer Vent Boxes & Couplings
- Duct and Duct Accessories
- Exhaust Fan Controls
- Grilles - Rectangular
- Grilles - Round
- Louvers
- Occupancy Switches
- Pressure Switches
- Relays & Misc Controls
- Silencers and Backdraft Dampers
- Soffit Vents
- Spare Parts
- Timers
- Tools For Sheet Metal
- Y Fittings and Transitions
- Zoning and Zone Dampers
why buy from us?
We're engineers passionate about home ventilation and serious about customer service – so you can count on us for carefully-selected equipment and expert advice to ensure your project is a success from specification to installation.
Your call is answered by qualified people who will gladly discuss your project in detail, advise you professionally and never sell you inappropriate products.
