S&P MD Series Motorized Dampers
The S&P MD series normally closed (power open) motorized dampers for round ducts can be used to control the sequencing of outside air in forced-air systems. The standard dampers are 24V but you can add the 120V to 24V transformer to power them with standard 120VAC.
Available in sizes 4 through 14 inch.
NORMALLY CLOSED = Closed damper when power OFF
 |
Do you have questions about the products on this page? Click on the ? image on the left or this link to ask us your questions! |
| #1 | Q: How often does the MD6 exchange in outside air? How is this controlled and is there a way to turn it off during extreme outside temperatures? A: This is just a motorized damper. It is normally connected to a controller for on/off operation. Take a look at the MD6-ES24VK damper and controller kit: https://www.hvacquick.com/products/commercial/Commercial-Fans/Makeup-Air-Fans/S-P-MD6-ES24VK-Outside-Air-Motorized-Damper-Kit Asked on 2024-01-13 by TW |
|---|---|
| #2 | Q: How long does it take for the damper to fully open? A: 3-4 seconds actuation time. Asked on 2023-05-01 by Matt |
| #3 | Q: What is the actuators Operating Temperature Range and Torque? Is the actuator made for both 24VAC and 24VDC? A: These need to be kept under 104F and are for 24vac. Torque values are not provided nor did the factory know. Asked on 2023-01-16 by FM |
| #4 | Q: When closed, does this damper form an airtight seal? A: Depends on your definition of airtight. The blade closes against a rubber seal. Asked on 2022-05-16 by AA |
Related Products
Suncourt Motorized Dampers for Fresh Air Intake and Zone Control
Motorized dampers primarily used for fresh air intake and zone control. Normally open or normally closed models. 4 to 12 inch diameters. 120V to 24V transformer included.
S&P MD6-ES24VK Outside Air Motorized Damper Kit
Allows fresh air to enter dwellings to meet building code through a 6” motorized damper controlled by a 24V temperature and humidity monitoring control.
S&P ReFresh RF8 Low Profile Fresh Air Fan Units
Introduce fresh air from the outside. Re-Fresh are engineered to meet building and energy codes that call for ASHRAE 62.2. Set speeds at 40, 100, and 170 CFM. LOW PROFILE.
S&P ReFresh RF10 Fresh Air Fan Units
Introduce fresh air from the outside. Re-Fresh are engineered to meet building and energy codes that call for ASHRAE 62.2. Set speeds at 40, 100, and 170 CFM. STANDARD PROFILE.
why buy from us?
We're engineers passionate about home ventilation and serious about customer service – so you can count on us for carefully-selected equipment and expert advice to ensure your project is a success from specification to installation.
Your call is answered by qualified people who will gladly discuss your project in detail, advise you professionally and never sell you inappropriate products.
