AirScape CF Cabinet Fan with Filtration
The AirScape Cabinet Fan is an air handler for general purpose ventilation and filtration. Its modular design allows it to be used by itself or in combination with multiple filter options, and to connect easily to various ducting arrangements. A simple wall mounted switch allows the fan to be run at any one of 10 speeds, and to be set to run on a timer for up to 12 hours. An optional wireless remote is also available.
An ECM motor provides outstanding airflow as well as efficiency. Every unit is housed in a sturdy aluminum enclosure with R-4 rated insulation. A 10 ft. power cord is installed in every unit. 115 or 230 VAC, 50/60 Hz, 1 phase (wired for 115V as standard, with 230V a simple field conversion).
The CF can be coupled with one of two filter options. The first is a filter module containing two 14" x 20" x 2" filter cassettes (AS-CF-1900-FB). The second option is flat filter attachment with MERV-6 polypropelene media (AS-CF-1900-FF).
MERV-15 FILTERS (NEAR HEPA FILTRATION), CASTERS AND HANDLES ARE AVAILABLE AS A SPECIAL ORDER OPTION. PLEASE CONTACT US.
Links:
CF Catalog Sheet/Brochure (PDF file)
CF Installation Manual (PDF file)
Controls Operation Video:
| Dimensions: | Air-handling Module: 16" x 22" x 22" |
|---|---|
| Airflow: | AS-CF-1600: 295-1600 cfm (min-max). 10 speeds. AS-CF-1900: 300-1930 cfm (min-max). 10 speeds. |
| Energy Use: | AS-CF-1600: 15-252 watts (min-max) AS-CF-1900: 25-500 watts (min-max) |
| Filter Rating: | Optional MERV 13 or MERV 6 filtration modules |
| Motor: | AS-CF-1600: 1/3 hp, 120/230 volt, 50/60 Hz, 1 phase, ECM AS-CF-1900: 1/2 hp, 120/230 volt, 50/60 Hz, 1 phase, ECM |
| Controls: | Low-voltage digital wall mounted controller. 10 speeds. Optional wireless remote control available. |
| Grilles/Duct: | Ducting and inlet or outlet grilles NOT included |
Click any image to enlarge it.
 |
Do you have questions about the products on this page? Click on the ? image on the left or this link to ask us your questions! |
| #1 | Q: Hi, is the #CB-MA-2-1 hydronic fan coil NSF/ANSI 61 certified? (safe for drinking water?) A: No, the coil is not certified for that purpose. A heat exchanger should be used to isolate potable water from the coil. Asked on 2017-11-19 by Pierre |
|---|---|
| #2 | Q: Can I put multiple controllers on a unit? A: 1 wired controller per fan. The controller that comes with the unit is wired using a cat5 cable to the cabinet fan. Only 1 controller can be attached. You can however add the wireless remote control which gives you a second controller. Asked on 2016-08-26 by Tim |
Related Products
HVACQuick Replacement Filters for Filter Boxes and AHUs
Replacement air filters for HVACQuick.com and AirScape filtration products.
AirScape AH-4 HEPA Filtration Air Scrubber
HEPA level filtration air scrubber. Aluminum double wall construction with insulation. MERV-11 pre-filter, H13 HEPA main filter. 1200 CFM. ECM motor with 10 speed controller.
HVACQuick CFB Series MERV-13 Inline Filter Boxes
Filter boxes for inline filtration. Models for 6, 8, 10 or 12 inch ducts. Aluminum construction. 4 inch MERV-13 filter included. MERV-15 (near HEPA) and carbon filters available.
HVACQuick CFB-HP Series HEPA Inline Filter Boxes
HEPA filter box for inline filtration. Aluminum construction. H13 HEPA filter and a MERV-11 pre-filter included.
why buy from us?
We're engineers passionate about home ventilation and serious about customer service – so you can count on us for carefully-selected equipment and expert advice to ensure your project is a success from specification to installation.
Your call is answered by qualified people who will gladly discuss your project in detail, advise you professionally and never sell you inappropriate products.
