Dayus Grilles and Registers - Multiple Styles
· Various blade styles - use top menu to select style
· Some available wioth multi-shutter damper
· Aluminum costruction
· Countersunk screwholes c/w painted mounting screws
· Durable powdercoat painted finish · Available in White, Silver or Mill
Any available size in 3 days! Call us at 877-711-4822 if you do not see the size you need listed.
The choice of grilles and registers listed on this page can be a little overwhelming.
We suggest:
1. Take a look at the Dayus Grille site for pictures and descriptions: www.dayus.com
2. Give us a call at 877-711-4822 with any questions you might have.
Finish Colors:
 |
 |
 |
 |
 |
| White | Silver | Mill | Brown | Black (Flat Black) |
 |
Do you have questions about the products on this page? Click on the ? image on the left or this link to ask us your questions! |
| #1 | Q: what do I need to order. My inside cut out is as follows. 8 inch width and 16 inch length. Want to make sure I get it right. Thank you A: Your cutout (opening) is the LIST size of the grille. The grille will be slightly undercut to slide into the cutout. The flange is around 1 inch and covers the area around the cutout. Call us at 877-711-4822 and we can help you place the order. Thx. Asked on 2017-10-04 by Barney |
|---|---|
| #2 | Q: I need to replace two return air grilles. their outside dimensions including flange are: No. 1 22 x 22 No. 2. 14.5 x 32. Are these the dimensions one uses on your website in ordering replacements A: The dims we seek are the interior dim...the outside can vary widely by maker. Asked on 2015-07-15 by Tom |
| #3 | Q: My wall register measures 9 1/2 by 7 on the inside. Can you make a register to fit this size? A: We can, it would incur machine charges for the odd dimensions, but any size is possible. Asked on 2014-03-08 by Mary Lou |
| #4 | Q: I need hvac system grilles sizes: one 16x71/2 inches and four 12x7 inch grilles.
Can grilles be made to these sizes? A: They can be made to fit that size opening, however those 7 inch dimensions are not standard and would incur a $45 machine charge for each one. Asked on 2013-12-14 by Alexandra |
| #5 | Q: What is turnback measurement on the DA821 register? Im looking for registers to fit 12x5 openings and am hoping for at least a 5/8 or greater turnback to fit the baseboards correctly. A: If you refer to the flange that sits on the sheet rock then you are in luck as this grille has a 1 inch perimeter all the way round. Asked on 2013-06-03 by John |
| #6 | Q: I shopped for a vent style on DAYUS, but didnt see a listing for it on your site. The model # is
DAIGHV-R-G {AN INDUSTRIAL VENT W/ DAMPERS]. Let me know if it can be ordered through you.
Thank you. A: Yes, absolutely. We do not list all the Dayus permutations on the website but can order it for you over the telephone. Call us at 877-711-4822. Thanks. Asked on 2013-04-09 by MARIE |
why buy from us?
We're engineers passionate about home ventilation and serious about customer service – so you can count on us for carefully-selected equipment and expert advice to ensure your project is a success from specification to installation.
Your call is answered by qualified people who will gladly discuss your project in detail, advise you professionally and never sell you inappropriate products.
