Soler & Palau Commercial

Soler & Palau Commercial Products

Blowers and Utility Sets

S&P CM Belt Driven Utility Vent Blower ACCESSORIES

S&P CM belt driven utility vent blower ACCESSORIES. Flanges, guards, shaft seals,dampers, vibration pads, etc.

S&P CM Belt Driven Utility Vent Blower Sets - UL705

S&P CM belt driven utility vent blower sets - UL705 listed models.

S&P CM Belt Driven Utility Vent Blower Sets - UL762

S&P CM belt driven utility vent blower sets - UL762 listed models.

Duct Blowers

S&P SQB Belt Drive Square Inline Centrifugal Duct Fans - 1 Phase

Square inline duct mounted fans. 100 to over 9,300 CFM. For clean air applications where space is a leading consideration. 1 PHASE MOTORS.

S&P SQB Belt Drive Square Inline Centrifugal Duct Fans - 3 Phase

Square inline duct mounted fans. 100 to over 9,300 CFM. For clean air applications where space is a leading consideration. 3 PHASE MOTORS.

S&P SQD Direct Drive Square Inline Centrifugal Duct Fans

Direct drive square inline duct mounted fans. Up to 2,800 CFM. For clean air applications where space is a leading consideration. UL-705 listed.

Makeup and Supply Air Fans

S&P ARS Direct Drive Rooftop Supply Fan

The ARS offers powerful axial supply performance in a roof mount design that is compact, lightweight and easy to install. For light to moderate static pressures.

S&P LCS Sidewall Propeller Supply Fans - 1 PHASE

Series LCS sidewall belt-drive propeller supply air fans. 1 PHASE motor models.

S&P LCS Sidewall Propeller Supply Fans - 3 PHASE

Series LCS sidewall belt-drive propeller supply air fans. 3 PHASE motor models.

Rooftop Exhausters Downblast

S&P ARE Direct Drive Rooftop Exhausters

Series ARE dome direct-drive propeller exhaust roof ventilators. An excellent choice for applications where light to moderate static pressures are present.

S&P LPD Rooftop Exhausters

Ultra low profile direct drive centrifugal roof/wall exhauster. Suitable for either ducted or nonducted applications. UL705.

S&P RCXII Rooftop Gravity Relief Vents

Series RCXII gravity relief/intake ventilators. Used to exhaust (relief) or supply (intake) air from or to an enclosed area without the need for a power operated fan.

S&P SDBD Downblast Direct Drive Roof Exhausters

Series SDBD downblast direct drive centrifugal roof exhausters. Suitable for either ducted or nonducted applications. UL705.

S&P SDB Downblast Belt Drive Centrifugal Roof Exhausters

Belt drive units used for the exhaust of relatively clean air from a wide range of commercial, industrial and institutional environments. UL705.

Rooftop Exhausters Upblast

S&P STXB UL762 Upblast Centrifugal Belt Drive Roof Exhausters

Used for restaurant hoods, kitchen exhaust, fume and smoke removal, laboratory fume hood exhaust and chemical process exhaust. UL-762 listed.

S&P STXD UL705 Upblast Centrifugal Direct Drive Roof Exhausters

Series STXD Upblast direct drive centrifugal roof/wall exhausters. Ideally suited for the removal of dirty, contaminated and/or high temperature air. UL705 listed.

S&P STXD UL762 Upblast Centrifugal Direct Drive Roof Exhausters

Series STXD upblast direct drive centrifugal roof/wall exhausters. For restaurant and general exhaust applications. UL762 listed.

Sidewall Exhaust Fans

S&P CWD Direct Drive Wall Exhausters

Series CWD direct drive centrifugal wall exhausters. Used to exhaust relatively clean air from industrial and commercial buildings. UL705 listed.

S&P GED Direct Drive Sidewall Exhausters

Series GED sidewall direct-drive propeller exhaust fans. Used for general ventilation for a wide variety of buildings and enclosed areas within buildings. UL705 listed.

S&P LCE Sidewall Propeller Exhaust Fans - 1 PHASE

Series LCE sidewall belt-drive propeller exhaust fans. 1 PHASE motor models.

S&P LCE Sidewall Propeller Exhaust Fans - 3 PHASE

Series LCE sidewall belt-drive propeller exhaust fans. 3 PHASE motor models.

Light Commercial Heat and Energy Recovery Ventilators

S&P TRC Commerical Energy Recovery Ventilators for All Climates

TRC and TRCeN series indoor energy recovery ventilators (ERV) for commercial applications.

Dampers

S&P Series 304SS Stainess Steel Rear Flanged Exhaust Shutter

Rear flanged exhaust shutter for areas that require extreme corrosion resistance. The frame/blades are 304 stainless steel. 2500 fpm max.

S&P Series 411 and 611 Non-Flanged Horizontal Mount Backdraft Dampers

Non-flanged horizontal mount exhaust backdraft dampers. The frame is galvanized steel with aluminum blades. 2" deep frame.

S&P Series 502 Rear Flanged Low Velocity Gravity Shutters

Fear flanged low velocity gravity exhaust shutter. Galvanized steel frame with aluminum blades. Vertical mount exhaust only. 2,000 fpm max.

S&P Series 556 Rear Flanged General Purpose Shutters

Rear flanged general purpose exhaust shutter. Galvanized steel frame with aluminum blades. Vertical mount exhaust only. 2,500 fpm max.

S&P Series ACD Extruded Aluminum Motorized Dampers

Extruded Aluminum motorized damper. 5" hat channel frame. 100-240 VAC power open / spring close motor with an end switch.

S&P Series ACL Extruded Aluminum Combination Louver and Damper

Superior resistance to rain while also offering you the ability to close the opening off if needed. 4" channel frame. Birdscreen standard. Optional motor.

S&P Series AMD Heavy Duty Aluminum Motorized Damper

HD motorized ALUMINUM dampers. 1-1/2 inch flanged frame. 6 inch blades. Factory installed 120/240 VAC motor with end switch.

S&P Series EASB & EASW PVC Blade Rear Flanged Shutter

Rear flanged exhaust shutters for areas where corrosion is a problem. UV stabilized PVC blades. White or black. 1,500 fpm max.

S&P Series EAS-HDGS Rear Flanged Shutter For Higher Velocity Applications

Rear flanged exhaust shutter. The frame and blades are extruded aluminum. Vertical mount exhaust only. 3,250 fpm max.

S&P Series EAS-RF Rear Flanged Shutter For Corrosion Prone Installations

Rear flanged shutter for high corrosion areas. The frame and blades are aluminum. Vertical mount exhaust only. 2,500 fpm max.

S&P Series FGS Rear Flanged FIBREGLASS Shutter

Rear flanged exhaust shutter for areas where corrosion is a problem. Heavy duty fiberglass pultrusion with stainless steel tie rods. 2,500 fpm max.

S&P Series GMD Heavy Duty Galvanized Steel Motorized Damper

HD motorized GALVANIZED STEEL dampers. 1-1/2 inch flanged frame. 6 inch blades. 120/240 VAC motor with end switch.

Louvers

S&P Series ADL Aluminum Door Louvers

Heavy duty door louvers. Extruded aluminum. 204-R1 Clear Anodized Finish.

S&P Series AFL Aluminum Fixed Louvers

ALUMINUM fixed louvers provide good protection from rain and weather. Channel frame is 4" deep with K-style nondrainable 45 degree blades. Birdscreen standard.

S&P Series DFL Drainable Extruded Aluminum Fixed Louvers

Excellent resistance to rain and weather. The drainable blade design channels water away from the blades and down the jambs. 4" channel frame. Birdscreen standard.

S&P Series GFL Galvaneal Steel Fixed Louvers

GALVANEAL steel fixed louvers provide good protection from rain and weather. Channel frame is 4" deep with K-style nondrainable 45 degree blades. Birdscreen standard.

S&P Series SDL Steel Door Louvers

Heavy duty door louvers. 20 gauge cold rolled steel. Gray primer finish.

Complete listing of Soler & Palau Commercial Products