Dayus DSSR Square to Round Transitions

· 26 gauge galvanized
· Square to round adapter allows connections from rectangular grilles to round ducting
· Square dimensions available on 1" increments
· Round dimension available on 2" increments from as small as 6" to as big as 18" in diameter (must be smaller than the square dimension) 

Any available size in 3 days! Call us at 877-711-4822 if you do not see the size you need listed.

Style:
List Width:
(Side 1)
Inches (Max of 24")
List Height:
(Side 2)
Inches (Max of 24")
Round Duct Dimension: Inches (Max of 18")

Notes:
1. Round dimension available from 6 to 18" in 2" increments
2. Round dimension must be at least 1" smaller than the smallest of width and height above.
3. Please see the "cut-sheet" or drawings above for actual vs. LIST dimensions. The LIST width and height are the size of the OPENING.
Production: Standard Production (3-4 Weeks - Least Expensive)
Friday Next Production (Not this Friday, but next Friday. Order must be placed before 1 pm PST Thursday)
3-Day Express Production (Most Expensive).




Model Number:
DSSR-08-14-14-STD
 
Total Price (each): $ 83.50  
Note: Dayus products are made-to-order. They are NON-RETURNABLE
         and the order cannot be cancelled once in production. The minimum
         order amount is $45 (will be reflected in the basket).

 

Dayus square to round transition

Do you have questions about the products on this page?

Click on the ? image on the left or this link to ask us your questions!
#1 Q:   Does this fit the Dayus DARH-FG filter grills?
A:   If ordered at the same time, easily. If they are not expecting it, sometimes it can be difficult as the undercuts are similar.

       Asked on 2023-03-30 by ff
#2 Q:   how is the round duct attached to the rectangular? how is the box made: rivets, screws, welds?
A:   The DSSR is put together with rivets and it has a spin on collar for the round to square connection.

       Asked on 2023-02-15 by FF
#3 Q:   Do all of the transitions have a depth of 4 inches?
A:   Yes, the depth is always 4 inches.

       Asked on 2015-11-11 by Glennn
#4 Q:   Does measurement listed in the drawing (List - 1/4) mean plus or minus 1/4
A:   Minus 1/4 inch. The product is undercut by the 1/4 inch to make sure it fits.

       Asked on 2015-08-17 by fxe

Related Products

Dayus DARH-FG Return Air Filter Grilles - LOUVER STYLE

Dayus DARH-FG return air grilles with filter holders. LOUVER STYLE. 2/3 inch blade spacing standard. MADE TO ORDER - Any size in 3 days!

Dayus DARE5-FG Return Air Filter Grilles - CUBE CORE STYLE

Dayus DARE5-FG return air grilles with filter holders. CUBE CORE STYLE. Grid of 1/2x1/2" cubes. MADE TO ORDER - Any size in 3 days!

Dayus Grilles and Registers - Multiple Styles

Multiple styles of return/supply air grilles and registers. All aluminum construction. Rectangular. MADE TO ORDER - Any size in 3 days!

Dayus DABL and DABLD Bar Linear Grilles - Made to Order

MADE TO ORDER Dayus DABL and DABLD stylish bar linear grilles and registers. Extruded aluminum construction. Full depth and options. Some sizes suitable for floor use. Any size in 3 days!

 

why buy from us?

We're engineers passionate about home ventilation and serious about customer service – so you can count on us for carefully-selected equipment and expert advice to ensure your project is a success from specification to installation.

Your call is answered by qualified people who will gladly discuss your project in detail, advise you professionally and never sell you inappropriate products.